Skip to main content

Wireguard

Setup Script

#!/bin/bash

# Checks to see if script is being run as root
if [ "$EUID" -ne 0 ]; then
  echo "Please run as root"
  exit
fi

sudo apt install wireguard

# Deletes keys in case this script is being run again
rm -f /etc/wireguard/* 

# Create necessary directories, including parents
mkdir -p /etc/wireguard/client


# Create and store server private and public key
wg genkey | tee /etc/wireguard/server_priv.key | wg pubkey | tee /etc/wireguard/server_pub.key

# Get the server public and private key as well as the network interface
server_priv_key=$(cat /etc/wireguard/server_priv.key)
server_pub_key=$(cat /etc/wireguard/server_pub.key)
network_interface=$(ip -o -4 route show to default | awk '{print $5}')


# Client
# Create client public and private key and store it in vars for later
wg genkey | tee /etc/wireguard/client/client_priv.key | wg pubkey | tee /etc/wireguard/client/client_pub.key
client_priv_key=$(cat /etc/wireguard/client/client_priv.key)
client_pub_key=$(cat /etc/wireguard/client/client_pub.key)

# Create initial client config
echo "[Interface]
PrivateKey = $client_priv_key
Address = 10.0.0.2/24

[Peer]
PublicKey = $server_pub_key
Endpoint = servername_or_ip:51820
AllowedIPs = 0.0.0.0/0
" > /etc/wireguard/client/wg0.conf


# Create the config file for wireguard
echo "[Interface]
Address = 10.0.0.1/24
SaveConfig = true
ListenPort = 51820
PrivateKey = $server_priv_key
PostUp = iptables -A FORWARD -i %i -j ACCEPT; iptables -t nat -A POSTROUTING -o $network_interface -j MASQUERADE
PostDown = iptables -D FORWARD -i %i -j ACCEPT; iptables -t nat -D POSTROUTING -o $network_interface -j MASQUERADE

[Peer]
PublicKey = $client_pub_key
AllowedIPs = 10.0.0.2/24
" > /etc/wireguard/wg0.conf

# Change permissions so only root can access the files
chmod 600 /etc/wireguard/server_priv.key
chmod 600 /etc/wireguard/wg0.conf

# Allow 51820 through ufw
ufw allow 51820/udp

# Start wireguard and set it to auto start on boot
wg-quick up wg0
systemctl enable wg-quick@wg0

Setup - Manual

1 - Update system and install wireguard

 apt update && apt upgrade && apt install wireguard

2 - Make the necessary folders 

 mkdir -p /etc/wireguard/client

3 - Create the server's public and private keys 

 wg genkey | tee /etc/wireguard/server_priv.key | wg pubkey | tee /etc/wireguard/server_pub.key

4 - Find the servers network interface

 ip -o -4 route show to default | awk '{print $5}

5 - Nano into 

 /etc/wireguard/wg0.conf

(Make sure to add network interface and server private key) 

 [Interface] Address = 10.0.0.1/24 
SaveConfig = true 
ListenPort = 51820 
PrivateKey = SERVER_PRIVATE_KEY 
PostUp = iptables -A FORWARD -i %i -j ACCEPT; iptables -t nat -A POSTROUTING -o NETWORK_INTERFACE_HERE -j MASQUERADE 
PostDown = iptables -D FORWARD -i %i -j ACCEPT; iptables -t nat -D POSTROUTING -o NETWORK_INTERFACE_HERE -j MASQUERADE

 6 - Update file permissions so only root can read the config file and private key 

 chmod 600 /etc/wireguard/server_priv.key chmod 600 /etc/wireguard/wg0.conf

 7 - Allow the vpn port through UFW

 ufw allow 51820/udp

 8 - Start wireguard and set it to auto start at boot 

 wg-quick up wg0 systemctl enable wg-quick@wg0

 9 - Create the client keys 

 wg genkey | tee /etc/wireguard/client/priv.key | wg pubkey | tee /etc/wireguard/client/pub.key

 10 - Create the client config file (copy to client device) 

[Interface] PrivateKey = CLIENT_PRIVATE_KEY 
Address = 10.0.0.2/24 [Peer] 
PublicKey = SERVER_PUBLIC_KEY 
Endpoint = SERVER_IP_OR_DOMAIN:51820 
AllowedIPs = 0.0.0.0/0

11 - Add peer info to the server config

[Interface] Address = 10.0.0.1/24 
SaveConfig = true 
ListenPort = 51820 
PrivateKey = SERVER_PRIVATE_KEY 
PostUp = iptables -A FORWARD -i %i -j ACCEPT; iptables -t nat -A POSTROUTING -o NETWORK_INTERFACE_HERE -j MASQUERADE 
PostDown = iptables -D FORWARD -i %i -j ACCEPT; iptables -t nat -D POSTROUTING -o NETWORK_INTERFACE_HERE -j MASQUERADE

# =================
[Peer]
PublicKey = PUBLIC_KEY
AllowedIPs = 10.0.0.2/24

 

 

 

 

 

Back to top